Review of Joyetech eVic Mini kits

This review about Joyetech eVic Mini TC kit will be small, just think that it is necessary to share interesting information with regards to the fashion box. I got it when it was released, somewhere around 20 days of September, and it was not a sample, and has the serial goods. An overview tightened because it was not wire except Cantal, for temperature control test.

Something you need to know about the Characteristics of this eVic Mini vape:

Size: 23.00*38.00*86.00mm(with one cell)/23.00*55.50*86.00mm(with two cells)

Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes

Output Wattage: 1-75W(one cell) /150W(two cells)

e-Juice Capacity: 4ml

Resistance Range: 0.05-1.5ohm for VT/TCR mode

0.1-3.5ohm for VW/BYPASS mode Temperature Range: 100-315°C/ 200-600°F

Colors: Black, White, Burgundy, Blue, Orange

It looks very good, in the hands of sitting too great.

Pin brass, spring-loaded, steel thread, but is fixed on the board, and not on the body.

An interesting point: initially with thermal control had problems. The fact that it did not fix the resistance, even if it is locked. If you go with the mod into the street, where there is pretty cool, spiral resistance decreased, and he memorized it. But how to update the firmware - the problem went away. He stopped to fix the resistance to the cold, however, if one is to screw spiral warm, it monitors its cools and stores the bare minimum. It seems to involve an internal temperature sensor on the board.

It is very interesting to get to power. Initially it was a 60-watt mode, so its all bought. But just two days ago out firmware version 1.20, naturally all updated, and then surprise events began to show up to 75W! My first thought: painted Chinese really will not give. Well then do not check?

 Resistance test spiral see the calculated stress too. Now that really is:

If someone does not understand, I will explain: on the test have changed Nichroom, he also has TCS, though not large. Resistance creeps up, the tension, too. Mod monitors in real time and adjusts it. More interesting looks like this chart.

I think everything is clear about it. 75W work seems to pay was a reserve. Let's see what's up with the TC mode. Nickel, a resistance of about 0.1 ohms

Here one can see the excitement on the bare spiral, if there is no cooling. It's not scary, because overheating still will not. But just enough to blow on it like everything is changing

Solid State - that I began to blow. That is, TC is working as it should.

The conclusions are as follows: simply and perfect. If someone will use in this mode - a great option.

Temperature control also works well, but only with the latest firmware. Used in this mode, a week, I satisfied.

And you can get this eVic VTC Dual TC kit from urvapin.com.